Instructions

SCPI Command Set
10
:CALCulate:MARKer<n>[:SET]:CENTer
Description
Sets the center frequency equal to the specified marker frequency, which moves
the marker to the center of the screen. In delta marker mode, the center
frequency is set to the delta marker frequency. This command is not available in
zero span.
Syntax
:CALCulate:MARKer<n>[:SET]:CENTer
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:CENT
:CALCulate:MARKer<n>[:SET]:RLEVel
Description
Sets the reference level to the specified marker amplitude. In delta marker mode,
the reference level is set to the delta marker amplitude.
Syntax
:CALCulate:MARKer<n>[:SET]:RLEVel
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:RLEV
:CALCulate:MARKer<n>[:SET]:STARt
Description
Sets the start frequency to the value of the specified marker frequency. In delta
marker mode, the start frequency is set to the delta marker frequency. This
command is not available in zero span.
Syntax
:CALCulate:MARKer<n>[:SET]:STARt
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:STAR
:CALCulate:MARKer<n>[:SET]:STEP
Description
Sets the center frequency step size equal to the specified marker frequency. In
delta marker mode, the center frequency step size is set to the delta marker
frequency. This command is not available in zero span.
Syntax
:CALCulate:MARKer<n>[:SET]:STEP
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:STEP