Instructions

6
:CALCulate:MARKer:AOFF
Description
Turns all the markers off.
Syntax
:CALCulate:MARKer:AOFF
Example
:CALC:MARK:AOFF
:CALCulate:MARKer<n>:CPEak[:STATe]
Description
Sets or queries the state of continuous peaking. It continuously puts the selected
marker on the highest displayed signal peak. This function is intended to
maintain the marker on signals with a frequency that is changing, and an
amplitude that is not changing.
Syntax
Query Syntax
:CALCulate:MARKer<n>:CPEak[:STATe] {OFF|ON|0|1}
:CALCulate:MARKer<n>:CPEak[:STATe]?
Parameter
<n>
0
1
OFF
ON
<NR1> Marker number 1 to 5
Turns continuous peaking off.
Turns continuous peaking on.
Turns continuous peaking off.
Turns continuous peaking on.
Return parameter
0
1
Continuous peaking is off.
Continuous peaking is on.
Example
:CALC:MARK1:CPE ON
:CALCulate:MARKer<n>:DELTa[:SET]:CENTer
Description
Changes the center frequency of the analyzer to the frequency difference
between the two markers. This command is not available if the delta marker is
off.
Syntax
:CALCulate:MARKer<n>:DELTa[:SET]:CENTer
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:DELT:CENT
:CALCulate:MARKer<n>:DELTa[:SET]:SPAN
Description
Changes the span of the analyzer to the frequency difference between the two
markers. This command is not available if the delta marker is off.
Syntax
:CALCulate:MARKer<n>:DELTa[:SET]:SPAN
Parameter
<n>
<NR1> Marker number 1 to 5
Example
:CALC:MARK1:DELT:SPAN