User manual

In schools, training centres, hobby and self-help groups, the use of chargers and
accessories must be supervised by trained personnel in a responsible manner.
Improper use (too high charging current or incorrect polarity) can supercharge or
damage the rechargeable battery. In the worst case, the battery can explode and
thereby cause serious damage.
Never connect the device to the rechargeable battery pack immediately if it is
brought from a cold environment to a warm one. The condensation which forms
can damage the device. Allow the device to reach ambient temperature before
connecting it.
If you suspect that safe operation is no longer possible, discontinue use immedia-
tely and prevent unauthorized use.
Safe operation can no longer be assumed if:
- There are signs of damage
- The device does not function properly
- The device was stored under unfavourable conditions for a long period of time
- The device was subjected to rough handling during transport.
Make sure that you always have these instructions at hand to ensure safe ope-
ration. Keep these operating instructions in a safe place and hand them over to
a subsequent owner. When connecting and operating the charger, a set of safety
instructions must be observed.
Place the device in a secure place so that it is absolutely secure and cannot fall
down! Otherwise, this could cause injuries. Never place the charger and the re-
chargeable battery on a ammable surface (e.g. carpet). Always use a suitable,
non-ammable, heatproof surface.
Ensure that there is sufcient ventilation during operation. Never cover the charger
and/or the connected rechargeable battery. Allow enough space (at least 20 cm)
between the charger, the rechargeable battery and other objects.
Never insert any objects in ventilation openings! This can cause a risk of contact
with live parts and short circuits with serious consequences.
For safety reasons, make sure you use the built-in balancer when charging or
discharging lithium cells.
Always keep rechargeable batteries away from ammable materials, both during
and after charging. Charge and store rechargeable batteries in a reproof con-
tainer.
Never charge defective or damaged rechargeable batteries.
Never charge rechargeable batteries connected to an electrical circuit.
Notes on rechargeable batteries
Therefore, always make sure that you have read and understood the following information
and safety instructions before handling rechargeable batteries.
Also read and observe the notes provided with the rechargeable battery!
a) General information
Do not leave rechargeable batteries lying around unattended. Children or pets may swallow
them. If rechargeable batteries have been swallowed, seek medical attention immediately!
Rechargeable batteries must not be short-circuited, disassembled or thrown into a re. This
may cause a re or explosion!
Leaking or damaged rechargeable batteries can cause corrosive injuries in case of contact
with the skin. Therefore you should use suitable protective gloves for this.
Do not recharge normal, non-rechargeable batteries. This may cause a re or explosion!
Rechargeable batteries must not be wet or damp.
Do not leave rechargeable batteries unattended while charging/discharging.
Pay attention to the correct polarity (plus pole/+ and minus pole/-). Both the device and the
rechargeable battery will be damaged if rechargeable batteries are improperly installed. This
may cause a re or explosion!
This charger has a mechanism that protects against connecting the poles incorrectly. It is
nonetheless possible that improperly installed rechargeable batteries can cause damage
under certain conditions.
In case the product will not be used for a long time (for example, during storage), disconnect
all connected rechargeable batteries from the charger and disconnect the charger from the
power supply.
Do not charge/discharge rechargeable batteries that are still hot (for example, due to the high
discharge current of this product). Before charging or discharging rechargeable batteries,
allow them to cool down to room temperature.
Do not charge/discharge damaged, leaking or deformed rechargeable batteries. This may
cause a re or explosion! Dispose of unusable rechargeable batteries in an environmentally
friendly manner. Such rechargeable batteries must no longer be used.
Do not use rechargeable battery packs that consist of different cell types.
Remove fully charged rechargeable batteries from the charger.
Do not charge/discharge rechargeable batteries directly in the model. First, remove rechar-
geable batteries from the model.
Adequate ventilation must be ensured since both the charger and rechargeable batteries be-
come hot during charging/discharging. Never cover the charger and rechargeable batteries!
Operating instructions
V-Charge Field 200 multifunctional charger
Item no. 1688224
Intended use
The processor-controlled charger is intended for charging and discharging NiCd/NiMH (1 –
16 cells), LiPo/Li-ion/LiFe/LiHV (1 – 6 cells) rechargeable batteries and lead-acid rechargeable
batteries (1 – 12 cells, 2 V – 24 V). The charging current can be set between 0.1 A and 10.0 A.
The maximum charging power is 200 W.
Furthermore, rechargeable batteries can also be discharged; the discharge current can be
0.1 – 3.0 A. The maximum discharge power is 8 W.
A colour graphic display with menu and a knob with press function make operation easier.
The charger may only be operated at 9 32 V/DC. The DC power source must supply sufcient
current to reach the output data. For lithium rechargeable batteries, a balancer for 1 to 6 cells
is integrated in the charger.
Do not connect non-rechargeable primary batteries (zinc-carbon, alkaline, etc.).
The polarity of the connection cables and the balancer must be observed!
Operation under adverse ambient conditions is not permitted.
Adverse conditions include:
Damp or excess air humidity.
Dust and ammable gases, vapours or solvent,
S trong vibrations.
Any use other than that described above is not permitted and may damage the product. Fur-
thermore, there are dangers such as short circuit, re, electric shock etc.
The product must not be modied or reassembled!
The safety instructions, the operating instructions of the rechargeable battery pack used and
the charging instructions of the respective rechargeable battery manufacturer must be strictly
observed!
This quick start guide explains the safety measures that must be taken to ensure that the
device is used safely. The individual device functions are explained in detail in the included
operating instructions on CD.
Delivery content
Charging treasure
Connection cable with XT60 socket and 2 crocodile clips
Quick start guide
Software CD with detailed operating instructions.
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the pro-
duct.
Safety instructions
These instructions contain important information on how to use the multimeter
correctly. Please read them carefully before using the multimeter for the rst
time.
Damage caused due to failure to observe these instructions will void the
warranty. We shall not be liable for any consequential damage.
We shall not be liable for damage to property or personal injury caused by
incorrect handling or failure to observe the safety information! Such cases
will void the warranty/guarantee.
For safety and licensing reasons, the unauthorised conversion and/or modication
of electrical devices is not allowed.
Do not leave the charger, and the rechargeable batteries that are connected to it,
unattended while in operation.
To ensure safe operation, the user must follow the safety instructions and warning
notices that are included in these operating instructions.
Chargers and accessories should be kept away from children! They are not toys.
Always comply with the accident prevention regulations for electrical equipment
when using the product in commercial facilities.