Instructions

4.Advanced User Guidebook
74
(1) Push Save button.
(2) Select Type in the bottom menu, in the left menu, turn the M knob to select
Clone.
(3) Select Source in the bottom menu, select one channel (CH1/CH2) or two
channels (CH1&CH2) in the right menu for Source.
(4) Select Line in the bottom menu. If a or b is selected, turn the M knob to move the
cursor. If ab is selected, turn the M knob to move the pair of cursors. If x is
selected, the entire screen will be selected automatically. The waveform
information is displayed at the left bottom corner of the screen.
Length
Frequency
Time
Note: If "Out Of Limits" appears in the information or a message "Waveform
points beyond the limit." appears on the screen, that means the length of the
cloned waveform exceeds the limit. When the source is CH1 or CH2, the
maximum length is 2M; When the source is CH1&CH2, the maximum length is
1M. Push the Acquire button, select Length in the bottom menu, and set the
record length to a smaller value.
(5) Select Save in the bottom menu.
 To save the waveform to internal memory, select Storage in the right menu
as Internal. Turn the M knob to select an object in the left menu, select Save
in the right menu.
 To save the waveform onto a USB memory device, insert a USB memory
device into the port on the front panel. If the icon appears on the top right
of the screen, the USB memory device is installed successfully. If the USB
memory device cannot be recognized, format the USB memory device
according to the methods in "USB disk Requirements" on P65. Select Storage
in the right menu as External. Select Save in the right menu. An input
keyboard used to edit the file name will pop up. The name is default as current
system date and time. Turn the M knob to select the keys, push the knob to
input. Select the key in the keyboard to confirm. The cloned waveform
will be saved onto the USB memory device as a file with the ota suffix.
To output the cloned waveform in the internal memory through the generator:
(The generator is optional.)
(1) Push Save button.
(2) Select Type in the bottom menu, in the left menu, turn the M knob to select
Clone.
(3) Select Save in the bottom menu, select Storage in the right menu as Internal.
(4) Turn the M knob to select an object in the left menu. If the source of the selected
waveform is CH1 or CH2, select AG Output in the right menu and set the output
channel of the generator. If the source is CH1&CH2, the output channel is not