Instructions

4.Advanced User Guidebook

Select pulse width condition and adjust the M knob

or click to set time, press panel

button or click

to move cursor to choose

which digit to be set.

Mode

Holdoff

Auto

Normal

Single

Holdoff

Reset

Acquire waveform even no trigger occurred

Acquire waveform when trigger occurred

When trigger occurs, acquire one waveform then stop

100 ns - 10 s, adjust M knob or click to set time

interval before another trigger occur, press

panel button or click to move cursor to

choose which digit to be set.

Set Holdoff time as 100 ns

5.Runt Trigger

Trigger pulses that pass through one trigger level but fail to pass through the other

trigger level. Shown as below figure,

In Runt Trigger mode, the trigger setting information is displayed on bottom right of

the screen, for example, ，indicates that trigger type is runt,

trigger source is CH1, polarity is positive, 0.00mV is the differential between up level

and low level threshold.

Runt Trigger

Runt Trigger menu list:

SETTING

INSTRUCTION

Single

Mode

Runt

Set vertical channel trigger type as runt trigger.