Instructions
3.Junior User Guidebook 
25 
The description of the Magnifier menu is shown as follows: 
Function Menu 
Setting 
Description   
Horizontal 
1 
5 
10 
Horizontal  magnification  factor.  The  size of 
the magnifier window is fixed. Therefor, the 
greater this  value, the shorter the horizontal 
length of the wave selection. 
Vertical 
1 
2 
4 
8 
16 
32 
Vertical magnification factor. The size of the 
magnifier window is fixed. Therefor
, the 
greater this value, the shorter the vertical 
height of the wave selection. 
Transparent 
ON 
OFF 
Make  the magnifier window  transparent  or 
not. 
The Cursor Measurement in Magnifier Window 
When the magnifier function is enabled, push Cursor panel key to display the cursor 
menu. In the bottom menu, select Window as Main or Extension to make the cursors 
shown in the main window or the magnifier window. 
Note: The magnifier function is disabled in wave zoom mode, waveform math, FFT, XY 
mode, slow-scan mode, stop state, average acquire mode, and persist mode. 










