Instructions

10.Technical Specifications
129
Data Bits
4 bit to 32 bit
Data Line Setting
H, L, X
CAN Trigger
Signal Type
CAN_H, CAN_L, TX, RX
Trigger Condition
Start of Frame, Type of Frame, Identifier,
Data, ID & Data, End of Frame, Missing
Ack, Bit Stuffing Error
Baud Rate
Common, Custom
Sample Point
5% to 95%
Frame Type
Data, Remote, Error, Overload
Waveform Generator (optional)
Performance
Characteristics
Instruction
Max Frequency Output
25 MHz (Sample 125 MS/s) or 50 MHz (Sample 250 MS/s)
(optional)
Channel
2
Vertical Resolution
14 bits
Amplitude Range
2 mVpp - 6 Vpp
Waveform length
8K
Standard Waveforms
Sine, Square, Ramp, and Pulse
Multimeter (optional)
Performance
Characteristics
Instruction
Full scale
reading
3¾ digits (Max 4000 – count)
Diode
0 V - 1.5 V
Input
impedance
10 MΩ
On/Off
measurement
<50(±30)Ω beeping
Capacitance
51.2nF - 100uF: ±(3%±3 digit)
Voltage
DCV: 400mV, 4V, 40V, 400V, 1000V: ±(1%±1digit)
Max. input: DC 1000V
ACV: 400mV, 4V, 40V, 400V: ±(1%±3digit) 750V: ±(1.5%±3digit)
Frequency: 40Hz - 400Hz, Max. input: AC 750V (virtual value)
Current
DCA: 40mA, 400mA: ±(1.5%±1 digit) 4A, 10A: ±(3%±3digit)
ACA: 40mA: ±(1.5%±3digit) 400mA: ±(2%±1digit)
4A, 10A: ±(3%±3digit)
Resistance
400Ω: ±(1%±3digit) 4KΩ~4MΩ: ±(1%±1digit)
40MΩ: ±(1.5%±3digit)