Instructions

3.Junior User Guidebook
8
two "Scale" knob control voltage scale of CH1, CH2.
6. Default: Call out the factory settings.
7. Print: Print an image of what appears on the instrument screen.
8. Decode: Turn on/off Decode function.
9. DMM (optional Digital Multimeter) or Snapshot (Shortcut button for measurement
snapshot)
10. Direction key: Move the cursor of the focused parameter.
11. M knob (Multipurpose knob): when a symbol appears on the menu, it indicates
you can turn the M knob to select the menu or set the value. You can push it to close
the menu on the left and right.
User Interface Introduction
1
3
10
19
14
27
24
8
9
11
12
16
17
20
21
22
26
28
7
18
25
2
4
6
23
13
15
6
5
Figure 3-5 Illustrative Drawing of Display Interfaces
1. Waveform Display Area.
2. Run/Stop (touchable) (see "How to Use Executive Buttons" on P91)
3. The state of trigger, including:
Auto: Automatic mode and acquire waveform without triggering.
Trig: Trigger detected and acquire waveform.
Ready: Pre-triggered data captured and ready for a trigger.
Scan: Capture and display the waveform continuously.