Instructions

5.Use the Arbitrary Function Generator (Optional)
102
Gain Offset
Adjust offset of gain plot, range from -250dB to
250dB.
Phase Scale
Adjust scale of phase plot, range from 5° to 180°.
Phase Offset
Adjust offset of phase plot, range from -180° to 180°.
Autoscale
Autoscale gain and phase plots.
Analysis
Run/stop the analysis.
F: Frequency; G: Gain; P: Phase.
To run the frequency response analysis, do the following:
1. The waveform generator output is connected to a device under test. The input to the
device is probed by CH1of the oscilloscope. The output from the device is probed by
CH2of the oscilloscope.
2. Push the Utility button, select Function in the bottom menu, select FRA in the left
menu
3. In the bottom menu, select

FRA. In the right menu, check

FRA, and set other
menu items.
4. In the bottom menu, select Setup or Chart. In the right menu, set the menu items.
5. In the bottom menu, check

Analysis to run the analysis.