User manual

14. Technical data

Display ...........................................6000 counts (digits)

Measuring rate ............................... approx. 3 measurements/second,

bar graph approx. 3 measurements/second

Measuring procedures V/AC, A/AC ... True RMS

Test lead length ..............................approx. 90 cm each

Measurement impedance .............. >10MΩ(Vrange)

Current clamp opening ...................max. 30 mm

Test socket spacing ........................19 mm

Automatic power-off ........................0 - 30 minutes (settable in 1 minute intervals)

Power supply ................................. 3 micro batteries (1.5 V, AAA or LR03)

Operating conditions .......................0 to 30 °C (<80% RH)

>30 to 40 °C (<75 % RH)

>40 to 50 °C (<45 % RH)

Operating altitude ..........................max. 2000 m

Storage temperature ......................-20 to +60 °C

Overvoltage category ....................CAT II 1000 V, CAT III 600 V, Pollution degree 2

Dimensions (W x H x D) .................approx. 77 x 41 x 228 mm

Weight ............................................approx. 265 g

Measurement tolerances

Measuring accuracy shown in ± (% reading + indication error in counts (= number of minimum

digits)).Thespeciedaccuracyisvalidforoneyearatatemperatureof+23°C(±5°C)at

a relative humidity of <80% non-condensing. Temperature coefcient: +0.1 x (specied

accuracy)/1 °C.