User manual

• (Rechargeable) batteries must be kept out of reach of children. Do not leave

(rechargeable) batteries lying around, as there is risk, that children or pets swallow

them.

• All (rechargeable) batteries should be replaced at the same time. Mixing old and

new (rechargeable) batteries in the device can lead to (rechargeable) battery

leakage and device damage.

• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into

re.Neverrechargenon-rechargeablebatteries.Thereisariskofexplosion!

6. Operating controls

1 Cable selector with built-in NCV sensor

2 Current clamp

3 NCV signal display

4 Current clamp open lever

5 SELECT key for functions (red symbols)

6 Measurement display (OLED display)

7 HOLD/SETUP key

HOLD = Freezes current measurement value in the display

SETUP = Access basic settings (auto power-off, OLED brightness)

8 MAX/MIN key = Displays maximum, minimum and average (AVG) values

9 COM test socket (reference potential, “negative potential“)

10 VΩtestsocket(“positivepotential“fordirectcurrent)

11 REL/ZERO key

REL = Relative value measurement

ZERO = Set display to 0 in direct current measurement (DC-A)

12 Battery compartment

13 Rotary switch for selecting the desired measuring function

14 Key for measuring point illumination

15 Measuring point illumination