User manual

70
Alternating voltage (V/AC)
Range Resolution Accuracy
60.00 mV* 0.01 mV
±(1.5% + 4)
600.0 mV* 0.1 mV
6.000 V 0.001 V
±(1.3% + 4)60.00 V 0.01 V
600.0 V 0.1 V
*Only available in “mV” mode
Speciedmeasurementrange:5-100%ofthemeasurementrange
Frequencyrange:45-400Hz;600Voverloadprotection;Impedance:10MΩ(mV:≤1000MΩ)
The multimeter may display 10 counts if a measurement input is short-circuited.
TrueRMSpeak(CrestFactor(CF))≤3CFto600V
TrueRMS peak for non-sinusoidal signals plus tolerance
CF >1.0 - 2.0 + 3%
CF >2.0 - 2.5 + 5%
CF >2.5 - 3.0 + 7%
Alternating voltage (V/AC) LoZ
Range Resolution Accuracy
6.000 V 0.001 V
±(2.3% + 7)60.00 V 0.01 V
600.0 V 0.1 V
Speciedmeasurementrange:5-100%ofthemeasurementrange
Frequencyrange:45-400Hz;600Voverloadprotection;Impedance:400kΩ(max.250V,3secs)
The multimeter may display 10 counts if a measurement input is short-circuited.
After using the LoZ feature, leave the multimeter for 1 minute before using it again.
TrueRMSpeak(CrestFactor(CF))≤3CFto600V
TrueRMS peak for non-sinusoidal signals plus tolerance
CF >1.0 - 2.0 + 3%
CF >2.0 - 2.5 + 5%
CF >2.5 - 3.0 + 7%