User manual

REL Relative measurement button (= reference measurement)

SELECT Switch between sub-modes

HOLD Freezes the current measurement

OL Overload = The measurement range was exceeded

LEAd “Incorrect socket” warning

OFF Move to this position to turn the multimeter off

True RMS Actual effective value measurement

Lowimp.400kΩ ImpedanceswitchingintheVmeasurementrange(10MΩto400kΩ)

EF Display for NCV function without voltage detection

- - - - Display for NCV function with voltage detection

Diode test symbol

Acoustic continuity tester symbol

Capacity measurement range symbol

Alternating current symbol

Direct current symbol

COM Connection for reference potential

mV Millivolt mode (exp. -3)

V Voltage mode (Volt = unit of electrical voltage)

A Current mode (Ampere = unit of electric current)

mA Milliamp mode (exp. -3)

µA Microamp mode (exp. -6)

Hz Frequency mode (Hertz = unit of frequency)

% Measurement function for pulse duration as a percentage (pulse-pause ratio)

Ω Resistancemode(Ohm=unitofelectricalresistance)

°C°F Measurement function for temperature measurement

NCV Non-contact AC voltage detection