User manual

• Check the multimeter and test leads for signs of damage before each measurement. Never take meas-

urements if the protective insulation is damaged (torn, missing, etc.). The test leads come with a wear

indicator. A second layer of insulation will become visible if the lead is damaged (the second layer of

insulation is a different colour). If this occurs, discontinue use and replace the measurement accessory.

• Do not use the multimeter just before, during or just after an electrical storm (electric shock /high-power

surges!).Ensurethatyourhands,shoes,clothes,theoor,circuitandcircuitcomponentsaredry.

• Avoid using the device in the immediate vicinity of:

- Strongmagneticorelectromagneticelds

- Transmitting antennas or HF generators.

These may distort the measurements.

• If you suspect that safe operation is no longer possible, discontinue use immediately and prevent unau-

thorised use. Safe operation can no longer be assumed if:

- There are signs of damage

- The device does not function properly

- The device was stored under unfavourable conditions for a long period of time

- The device was subjected to rough handling during transport.

• Do not switch the device on immediately after it has been brought from a cold room into a warm one. The

condensation generated may destroy the product. Leave the device switched off and allow it to reach

room temperature.

• Do not leave packaging material lying around carelessly, as it may become a dangerous toy for children.

• Observe the safety information in each section.