Instructions
c) Inserting the battery, selecting the operating mode, setting the
charging current
• Insertasuitablerechargeablebatteryintoanybatteryslot(2),observingthecorrectpolarity
(notepositive/+andnegative/-,seethelabelinthebatterycompartmentandonthebattery).
Duetothedesign/sizeofbatteriesoftypeC,onlytwoofthefourbatteryslotscanbe
used.
• Thevoltageofthebatteryappearson the corresponding LC display and the “CHARGE”
operatingmodeashesforfourseconds.Duringthistime,youcanpressthe“MODE”key(6)
repeatedly to select the operating mode.
• “300mA”isthendisplayedasthechargingcurrentandtheoperatingmode“CHARGE”or
“CHARGETEST”ashes.Duringthistime,youcanpressthe“CURRENT”key(4)repeatedly
to select the charging current.
• When no button has been pressed for a few seconds, the charging process starts.
If, after inserting the battery, no voltage is displayed, either the battery contacts have
oxidised or are highly resistive, or the battery has discharged deeply or is faulty.
Whether or not a different operating mode can be selected or the charging current can
bechanged,pleaserefertoChapter8.d)and8.e).
d) Subsequently changing the operating mode or charging current
for a single battery slot
• Pressthecontrolkey (3) fortherespectivebatteryslot whose operatingmodeorcharg-
ing/dischargingcurrentyouwanttochange.ThecorrespondingindicatorontheLCdisplay
ashes(pressthecontrolkeyforthebatteryslot2x,ifnecessary).
• Selecttheoperatingmodebybrieypressingthe“MODE”key(6).
• Changethechargingcurrentbybrieypressingthe“CURRENT”key(4).
• Wait a few seconds, the settings are applied.
31