Instructions

• However,keepsufcientdistancetoavoidfaultymeasurementduetotheIRthermometer

heating.

• Example: At a distance of 120 cm the measurement diameter is 6 cm.

d) Target laser

• The target laser can be switched on and off. Press and hold the backlight/laser button.

• When the laser is activate, the laser symbol appears on the display.

• Press the backlight/laser button again to deactivate the target laser. The laser symbol

disappears.

e) Backlight

When the device is on, press the backlight/laser button to turn the display backlight on/off.

f) Maximum, minimum, differential and average measurement

function

• When the measuring button is released, the last measured value is frozen on the display. The

standby indicator HOLD lights up on the display.

• Repeatedly press the MODE button. One of the following indicators and the associated

measured value appears on the display:

MAX: Highest measured value of the last measurement.

MIN: Lowest measured value of the last measurement.

AVG: Average value of the last measurement.

DIF: Difference between highest and lowest measured value of the last measurement.

These values always refer to IR measurement, not to contact measurement.

g) Bar graph

• The bar graph can be used to graphically view the current measured value in relation to the

MIN/MAX values. The left end represents the MIN value of the current measurement, the

right end the MAX value.

• Example: The MIN value is 0 °C and the MAX value +100 °C. The current measurement is

+50°C.Inthiscasethebargraphdeectstothemiddleofthedisplay.