User manual

49
Backlight enabled
 Lockiconforphasedetection(ashing=detectionmode,constant=phasedetected)
Relative value measurements (=reference value measurement)
Minimum value
Maximal value
AUTO Automatic measurement range is enabled
Automatic shut-off is enabled
Low battery indication
Hold function is enabled
Warning symbol for dangerous voltage (with warning sound when the measuring range is exceeded)
Direct current DC
 Polarityindicatorforcurrentowdirection(negativepole)
Alternating current AC
Low impedance
% Duty cycle representation in mode
Voltage/Current representation in form of
Zero mode
Inrush current measurement enabled
Low Pass Filter in LPF mode
Analogue display scale
Overload indicator
References to symbols in the display are indicated by [ symbols ] throughout the manual. Symbols which
are displayed but not directly relevant to described functions are not mentioned explicitly.
Example: [ ] will show in the display.