Instructions

43
REL Relative value button (= reference value measurement)
SELECT Switch to sub-functions
RANGE Manually select measuring range
MAX MIN Maximum/minimum memory
HOLD Freezes the current measurement
OL Overload = the measuring range was exceeded
OFF Move to this position to turn the multimeter off
Low battery warning (replace the battery)
Diode test symbol
Acoustic continuity tester
Capacity measuring range
°C °F Temperature unit (degrees Celsius/Fahrenheit)
Alternating current
Direct current
COM Connection for reference potential
V Voltage mode (Volt = unit of electrical voltage)
A Current mode (Ampere = unit of electric current)
µA Current mode (Micro-Ampere)
Hz Frequency mode (Hertz = unit of frequency)
Ω Resistancemode(Ohm=unitofelectricalresistance)
Motor 3-phase rotation direction indicator
LoZ Low-impedance(300kΩ)
Disables automatic backlight
Indicates the direction of the current when taking current clamp measurements (not relevant)
Indicates the direction of the current when taking current clamp measurements (not relevant)