Instructions

42
8. Display and symbols
The display contains the following symbols.
1 True root mean square
2 Diode test symbol
3 Acoustic continuity tester
4 Volt (unit of electrical voltage)
5 Micro symbol
6 Ampere (unit of electrical current)
7 Nano symbol
8 Milli symbol
9 Micro symbol
10 Farad (unit of electrical capacity)
11 Mega symbol
12 Kilo symbol
13 Ohm (unit of electrical resistance)
14 Hertz (unit of frequency)
15 Degrees Celsius (unit of temperature)
16 Degrees Fahrenheit (unit of temperature)
17 Measured value
18 3-phase rotation direction indicator (“clockwise”)
19 Backlight enabled
20 Lockiconforphasedetection(ashing=detectionmode,constant=phasedetected)
21 Delta symbol for relative value measurements (=reference value measurement)
22 Minimum value
23 Maximal value
24 3-phase rotation direction indicator (“anticlockwise”)
25 Automatic measurement range is enabled
26 Automatic shut-off is enabled
27 Battery level indicator
28 Hold function is enabled
29 Warning symbol for dangerous voltage (with warning sound when the measuring range is exceeded)
30 Direct current ( )
31 Polarityindicatorforcurrentowdirection(negativepole)
32 Alternating current ( )
33 Low impedance