User manual
Push and hold the SETUP key for approx. 2 seconds.
The display shows the setup windows „SETUP 1 APO TIME“ for
automatic power-off. Push the SELECT key (5) to switch to the
menu „SETUP 2 OLED BRIGHT“.
Use the MAX MIN key (8) to increase the value in intervals of
10%.
Use the REL ZERO key (11) to decrease the value in intervals of 10%.
A brightness value of 0% sets the lowest brightness necessary to read the display. 100% sets
the highest brightness.
To exit the settings menu, push and hold the SETUP key for approx. 2 seconds. The display
returns to measuring operation.
.
The HOLD function freezes the current measurement in the display so you can read or
protocol it without any rush.
Push the HOLD key (7) to activate the HOLD function; a beep sounds as conrmation and the
display shows „H“.
To turn off the HOLD function, push the HOLD key again or switch to a different measuring
function.