User manual



The MAX/MIN function allows you to register the maximum, minimum and average (AVG)
values of a measurement. The maximum and minimum values for the current measurement
are registered after the MAX/MIN function is activated.
Push the MAX/MIN key (8) to x the current measuring range (auto range is deactivated). The
display shows the inverse symbol „MAXMIN“. The main display registers and displays the
maximum value continuously. The value is marked by the symbol „MAX“.
The current measurement can still be read in the small upper line.
Push the MAX/MIN key (8) again to switch to the MIN function. The main display registers and
displays the minimum value continuously. The value is marked by the symbol „MIN“.
Push the button again to switch tot he AVG function. The value shown is the current average
measurement. The value is marked by the symbol „AVG“.
To turn off the function, push and hold the MAX/MIN key for approx. 2 seconds. The inverse
symbol „MAXMIN“ disappears and automatic range selection is activated.
 
