User manual

45
8. DISPLAY INDICATIONS AND SYMBOLS
The following symbols and information are present at the device or in the display.
AUTO Automatic measuring range selection is active
OFF Switch position “off”
HOLD Call/switch off Data Hold function or function is active
MODE Switching button for multiply assigned measuring function
RANGE Button for manual measuring range selection and to switch to auto range
OL Overow display, the measuring area was exceeded
Battery change display; replace the batteries as soon as possible to avoid
measuring errors!
Symbol for the battery data used
Symbol for the diode test
Symbol for the acoustic continuity tester
AC Symbol for alternating current
DC Symbol for direct current
V, mV Volt (unit of electric voltage), Milli-Volt (exp.–3)
A Ampere (unit of electric current)
°C, °F Degrees Celsius/degrees Fahrenheit (unit for the temperature)
Temp Measuring function for temperature measuring
Ω, kΩ, MΩ Ohm (unit of electrical resistance), Kilo-Ohm (exp.3), Mega-Ohm (exp.6)
COM Reference potential
Marks at the current probe for centring the conductor
Symbol for display illumination
Symbol for measuring point lighting
Read the instructions attentively