User manual

44
7. PRODUCT DESCRIPTION
The multimeter (referred to as DMM in the following) indicates measured values on a digital
display that can be illuminated. The measured value display of the DMM comprises 2000
counts (count = smallest display value).
Automatic deactivation switches off the device after approx. 15 minutes if it is not operated.
This saves battery power and thus extends the period of operation.
The meter can be used for do-it-yourself or for professional applications up to CAT III.
There are transport protection caps in the angled plugs of the enclosed measuring lines.
Remove them before pushing the plugs into the meter sockets.
Dial switch (13)
The individual measuring functions are selected via a rotary
control. The automatic range selection “AUTO” is active for
some measuring functions. The appropriate measurement
range is set individually for each application.
If the multimeter switch is set to “OFF”, the meter is switched
off. Always turn the meter off when it is not in use.
The gure shows the measuring function layout.