User manual

42
c) Inserting and changing the batteries
The multimeter is operated with two 1.5 V button cell batteries (e.g. LR44, A76,
AG13, 357 or equal build). You need to insert new batteries before initial operation
or when the empty battery symbol ashes in the display.
Proceed as follows to insert or change the batteries:
- Disconnect the meter from all measuring circuits and switch it off.
- Loosen the rear screw at the battery compartment lid (8) with a matching Phillips
screwdriver. Remove the screw and push the battery compartment lid off of the
device.
- Replace the at batteries with new one of the same type. The plus pole of the
batteries points outwards.
- Close the casing carefully again.