Manual

Ifnofaultcodesarestored,thedisplay(1)shows“No(pending)codesarestoredinthemodule!”.
If this happens, wait a few seconds or press any button to return to the menu.
If fault codes are stored, the display will appear as follows:
DTC
P0143
Generic
1/8
Current
O2 Sensor Circuit Low Voltage
Bank 1 Sensor 3
11.2 Clearing fault codes
Shut off the engine before clearing the fault codes.
Before executing this function, make sure the fault codes are retrieved and recorded.
After clearing the fault codes, restart the fault code query to display the faults that are
still present. If any of the displayed fault codes are related to severe problems, please
ndthereasonforthefaultcodeandthenxtheproblem.Youcanthenpermanently
erase the fault codes.
Select[EraseCodes]withbuttons (6)and (7),andthenpresstheOKbutton(2).
Diagnostic Menu
Read Codes
Erase Codes
I/M Readiness
Data Stream
Evap System Test
Vehicle Information
2/6
48