Security Datasheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 2814377
Material Safety Data Sheet
7. Handling and Storage
Precautions for safe handling:
Avoid short circuiting the battery. Avoid mechanical damage of the battery. Do not open or disassemble. Batteries may explode
or cause bums, if disassembled, crushed or exposed to fire or high temperatures. Do not short or install with incorrect polarity.
Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated
area. Prevent concentration in hollows and sumps.
Conditions for safe storage, including any incompatibilities:
Store in a cool, dry, well-ventilated place. Keep away from heat, avoiding the long time of sunlight.
8. Exposure Controls/Personal Protection
Control parameters:
CAS No. ACGIH NIOSH OSHA
1313-13-9 N/A N/A N/A
7782-42-5 TLV-TWA 2mg/m3 REL-TWA 2.5mg/m3 PEL-TWA 15mppcf
PEL-TWA 20mppcf
9002-84-0 N/A N/A N/A
9003-07-0 N/A N/A N/A
12597-68-1 N/A N/A N/A
7439-93-2 N/A N/A N/A
108-32-7 N/A N/A N/A
110-71-4 N/A N/A N/A
7791-03-9 N/A N/A N/A
Appropriate engineering controls:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Personal Protective Equipment:
Respiratory protection: Wear suitable protective mask. For a !arge large number of battery leakages, wear chemical
protective clothing, including self-contained breathing apparatus.
Hand Protection: Wear appropriate protective gloves to reduce skin contact.
Eye Protection: Wear safety goggles or eye protection combined with respiratory protection.
Skin and Body Protection: Working environment required, wear suitable protective clothing to minimize contact with skin.
The type of protective equipment must be according to the concentration and the content of certain hazardous substances in
the workplace.
Page 5 of 11