Manual

3
Operating Instructions
VC-Qi-WC15 15W Qi Wireless Charger
Item no: 2758283
1 Intended use
The product is a wireless charger. Use it to charge products that are compatible with the Qi
wireless charging standard. It features a moving coil that will target a device when placed on
the charging platform and move towards it.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers
Forum.
2 Delivery contents
■
Product
■
USB-C® to USB-A charging cable
■
Operating instructions
3 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can lead to personal injury.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet.
Read the operating instructions carefully.
The Qi symbol indicates this is a Qi certified device
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
6 Product overview
1
2
3
1 LED 3: green
moving charging coil
2 LED 1 / LED 2: red / blue
status indicators
3 USB-C® power input
7 Connection
1. Connect one end of the cable to the
USB-C® port on the product.
2. Connect the other end to a suitable
power source.
8 Wireless charging
■
Place a compatible device onto the wire-
less charging platform.
■
You may need to adjust the device posi-
tioning for wireless charging to start.
■
The LED indicators will indicate the
status, see section: LED indicators
[}3].
■
If LED 1 & 2 are flashing red/blue, lift the
device off the charging platform and then
place it back again to resume charging.
9 LED indicators
LED Status Description
1 & 2 Solid red Standby
1 & 2 Solid blue Charging in progress, fully charged
1 & 2 Flashing red/blue Over current, short circuit, foreign object detec-
tion, device not on the correct position
1 & 2 Flashing red over voltage, low voltage
3 Solid green Standby
10 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
11 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
■
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration
of conformity in the available languages.