Instructions

TECHNICAL DATA

Voltage range ................................................12 - 1000 V/AC, 12 - 1200 V/DC

Frequency range ...........................................0 Hz; 16 - 400 Hz

LCD resolution ...............................................+/- 12, 24, 50, 120, 230, 400, 600, 1200 V

Measurement tolerance for voltage check .....+/- (3% + 5 digit)

DC/AC voltage recognition ............................automatic

Auto-Power-On ..............................................>12 V (DC/AC)

Response time ...............................................<1 s

Resistance range ...........................................0 - 1999 Ohm

Resistance measurement response time ......<2 s at 25 °C

Times of controlled reduction

(Thermal protection voltage/time) ..................400 V/30s, 600 V/10s, 1000 V/5s

Max measurement time (RCD test) ...............30 s

Regeneration time (RCD test) .......................240 s

Max. test current ( RCD test) ........................30 mA/230V

Max. Current without RCD burden ...............<6 mA/1200 V

Measurement category ..................................CAT IV 600 V / CAT III 1000 V

Norms ............................................................EN 60529 and EN 61243-3:2014

Kind of protection ...........................................IP64

Level of contamination ...................................2

Temperature range ........................................-15 °C to +45 °C

Humidity .........................................................max. 85% relative humidity, not condensing

Altitude over sea level ...................................max. 2000 m

Length of measurement cable .......................ca. 93 cm

Current supply ...............................................2 type AAA/Micro batteries

Weight ...........................................................130 g

Dimensions ....................................................67 x 205 x 27 mm (B x H x T)

CONTINUITY TEST

Indication optic and acoustic (<400 kΩ +/-50%)

Test current <5 uA

Overvoltage protection 1000 V/AC / 1200 V/DC

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming, or the capture in

electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.