Instructions
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2359015_P716A_V1_0821_02_jh_m_EN
Placement
Important note
The mains socket you plan to use to power the product must be easily accessible at all times.
a) Surface
1. Place the product on a dry, at and even surface close to the mains socket you will connect it to.
2. The product is equipped with anti-slip feet. NOTICE! the feet may leave marks on sensitive surfaces.
b) Wall mounting
The product has openings at the bottom for wall mounting. Contact a technician that can help with the wall
mounting procedure in case you cannot handle it on your own.
Operation
After you connect the product to the mains supply and the cloud, use the mobile app to control the recep-
tacles.
Important note
Do not connect loads before the product is connected to the cloud.
a) Connecting to the cloud
Before you can use the product, connect it to the cloud.
1. Move the reset switch –/O (8) to O.
2. Connect the mains cable (1) to a regular grounded mains socket.
3. Move the switch –/O to – to turn the product on.
- the power indicator
lights up.
4. Connect the product to the cloud. Follow the instructions in the app manual.
You have connected the product to the cloud. The product is now ready for use.
b) Using after connecting to the cloud
After you have connected the product to the cloud, you can connect loads and control the receptacles from
the mobile app.
1. Move the reset switch –/O (8) to O.
2. Connect the mains cable (1) to a regular grounded mains socket.
3. Plug desired loads into the receptacles (6).
4. Move the switch –/O to – to turn the product on.
- the power indicator
lights up.
- the Wi-Fi indicator
indicates the Wi-Fi status.
5. Control the receptacles in the mobile app.
6. After use, move the switch –/O to O to turn the product off.
c) USB power supply
Use the USB socket to power or charge suitable devices (e.g. charging of a mobile device).
Connect devices to the USB port via USB cable.
Overcurrent protection
If the total current exceeds the maximum permissible value, the receptacle with the highest power consump-
tion is deactivated automatically.
To reset the protection:
1. Disconnect the load from the deactivated receptacle.
2. Restore the deactivated receptacle in the mobile app.
Resetting
a) Soft reset
A soft reset restarts the product. Stored settings remain untouched.
1. Make sure the product is switched on.
2. Move the reset switch –/O to O, then back to – to initiate resetting.
3. Enable all the receptacles via the app.
- the product restarts.
The reset is completed and the product ready for operation.
b) Hard reset
Perform a hard reset if the cloud connection fails or if you want to connect the product to another Wi-Fi
network. A hard reset removes all stored settings and re-applies the factory default settings.
1. Make sure the product is switched on.
2. Use a thin insulated tool and press the reset button Reset (5) until the Wi-Fi indicator
goes out,
comes on again and ashes quickly.
- the product restarts.
The reset is completed and the product ready for operation.
Maintenance and Cleaning
The product does not require any maintenance. Repair or maintenance work must be carried out by a
specialist.
1. Move the reset switch –/O to O.
2. Disconnect the mains cable from the power supply.
3. Disconnect connected loads.
4. Clean with a clean, dry and soft cloth. Remove dust with a soft, clean brush and a vacuum cleaner.
NOTICE! Do not use aggressive chemical or scouring cleaning agents. They destroy the product.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, herewith declares that this product con-
forms to the 2014/53/EU directive.
The full text of the EU declaration of conformity is available at the Internet address below:
www.conrad.com/downloads
Select a language by clicking on the corresponding ag icon, and then enter the order number
of the product into the search box. You may then download the EU declaration of conformity as
PDF le.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus full your statutory obligations and contribute to the protection of the environment.
Technical data
Rated Input ........................................... 220 – 240 V/AC, 50 Hz, 16 A
Overcurrent protection .......................... 16.8 A ±2 %
Standby power consumption ................ 0.85 - 3 W
Measuring accuracy ............................. Range : 0 - 4113 W
Power > 10 W : tolerance < ±1 %
Power 5 - 10 W : tolerance < ±2 %
Power 1 - 5 W : tolerance < ±10 %
Power <1 W : tolerance < ±0.23 W
Wi-Fi ..................................................... IEEE 802.11 b/g/n, 2.4 GHz
Wi-Fi security ........................................ WPA, WPA2, WPA/WPA2
Wi-Fi range ........................................... max. 30 m
Output power ........................................ 9 dBm
USB port ............................................... 5 V/DC, max. 2.1 A
Protection class .................................... I
Enhanced protection
against accidental contact .................... yes
Cable length ......................................... 1.8 m
Operating conditions ............................. 0 to +40 °C, 10 – 90 % RH non-condensing
Storage conditions ................................ -10 to +70 °C, 5 – 90 % RH non-condensing
Weight ..................................................approx. 986 g
Dimensions (L x W x H) ........................261 x 118 x 51 mm