Manual
Operating Instructions
UC-2ACX001 USB Charger
1x USB-A and 1x USB-C, PD &
Fast Charge
Item No. 2300296
Intended use
This product is designed to charge and power up to
two suitable USB-powered devices. Fast charging
(Power Delivery) is supported.
Power is supplied via a normal household mains
socket. The product is protected against overvolt-
age, overcurrent, overheat and short circuits.
It is intended for indoor use only. Do not use it out-
doors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not
rebuild and/or modify this product. If you use the
product for purposes other than those described
above, the product may be damaged. In addition,
improper use can result in short circuits, res, elec-
tric shocks or other hazards. Read the instructions
carefully and store them in a safe place. Make this
product available to third parties only together with
its operating instructions.
This product complies with the statutory national
and European requirements. All company names
and product names are trademarks of their respec-
tive owners. All rights reserved.
Delivery content
• USB charger
• Operating instructions
Up-to-date operating
instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the
triangle is used if there is a risk to your
health, e.g. due to an electric shock.
The symbol with the exclamation mark
in the triangle is used to indicate impor-
tant information in these operating in-
structions. Always read this information
carefully.
This symbol indicates that the product
meets the energy efciency require-
ments for Class VI.
Safety instructions
Read the operating instructions
carefully and especially observe the
safety information. If you do not fol-
low the safety instructions and infor-
mation on proper handling in this
manual, we assume no liability for
any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, steam and solvents.
• Do not place the product under any mechani-
cal stress.
• If it is no longer possible to operate the prod-
uct safely, take it out of operation and protect it
from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can dam-
age the product.
• Consult an expert when in doubt about the op-
eration, safety or connection of the appliance.
• Maintenance, modications and repairs must
only be completed by a technician or an author-
ised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected devices
• Also observe the safety and operating instruc-
tions of any other devices which are connected
to the product.
• Always lay the cables so that nobody can trip
over or become entangled in them. This poses
a risk of injury.
c) Product
• Never use the product immediately after it has
been brought from a cold room into a warm one.
The condensation generated could destroy the
product. There is also a risk of a fatal electric
shock! Allow the product to reach room tem-
perature before connecting it to the power sup-
ply and putting it to use. This may take several
hours.
• Never pour any liquids over electrical devices
or place objects lled with liquid next to the
product.
If liquid or an object does enter the interior of
the device, power down the respective socket
(e.g. switch off the circuit breaker), and then
remove the mains plug from the mains socket.
Discontinue use.
• Remove the product from the mains socket and
the connected device when you are not using it.
• The product generates heat during use. Ensure
that there is sufcient ventilation and do not
cover the product during use.
• Do not short-circuit the USB outputs.
• The mains socket that the device is plugged into
must be easily accessible.
• Never connect or disconnect power adaptors if
your hands are wet.
• Only connect the power adaptor to a normal
mains socket connected to the public supply.
Before plugging in the power adaptor, check
whether the voltage stated on the power adap-
tor complies with the voltage of your electricity
supplier.
• For safety reasons, disconnect the power adap-
tor from the mains socket during storms.
• Never leave the power adaptor and the con-
nected device unattended during use.
Operation
CAUTION
Risk of re or shock!
Ensure proper connection when connect-
ing a USB device. A faulty connection can
result in electric shock or re.
NOTICE
Prevent product damage!
Ensure that the specications of the USB
device you intend to connect match the con-
nection ratings of the charger.
1. Turn off the USB device and connect it to the charger with a suitable USB cable.
- Fast charging (Power Delivery) is supported.
Observe the below table when connecting:
Port Voltage Current (max.) Power (max.)
USB-C
TM
5 V/DC 3 A 15 W
9 V/DC 2.22 A 20 W
USB Type A 5 V/DC 2.4 A 12 W
Total simultaneous power consumption on all ports 32 W
2. Insert the charger into a normal household mains socket. The USB device will now charge.
3. After use, turn the USB device off and disconnect it. Unplug the charger from the mains socket.
Care and cleaning
• Disconnect the product from the power supply.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
case or cause the product to malfunction.
• Do not immerse the product in water.
• Wipe the product regularly with a dry cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separate-
ly from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by
the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner,
must be removed by end users from the WEEE in a non-destructive manner before it is handed
over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
• in our Conrad ofces
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manu-
facturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
Technical data
Input voltage .................................................100 – 240 V/AC
Input AC frequency .......................................50/60 Hz
Output voltage .............................................. PD: 5.0 V/DC (3.0 A) / 9.0 V/DC (2.22 A)
USB-A: 5.0 V/DC (2.4 A)
Output current ............................................... PD: 5.0 V/DC (3.0 A) / 9.0 V/DC (2.22 A)
USB-A: 5.0 V/DC (2.4 A)
Output power ................................................32.0 W
Average active efciency ..............................83.60 %
Efciency at low load (10 %) ........................77.5 %
No-load power consumption ......................... 0.12 W
Operating conditions .....................................0 to +25 °C, 25 – 85 % RH (non-condensing)
Storage conditions ........................................ -20 to +60 °C, 10 – 90 % RH (non-condensing)
Dimensions (W x H x D) ...............................approx. 36 x 55 x 57 mm
Weight ..........................................................approx. 98 g
Model identier UC-2ACX001
Commercial Registration Number HRB 3896
Manufacturer Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2300296_v3_1023_02_dm_mh_EN_(1)