Instructions

Operating elements
1 Cigarette lighter plug
2 LED indicator light
3 USB-A port
4 USB-C
TM
port
1 2 3 4
Operation
Always switch off the USB device to be connected before connecting it to a USB port. Make sure
the connection is correct. If the product is not connected properly, it could overheat or cause an
electric shock or re.
Make sure the USB device matches the specications of the USB car charger. Observe the
information in chapter “Technical data”.
• The product can charge two USB devices at once. Connect one or two powered down USB devices to
the USB-A (3) and/or USB-C
TM
port (4). USB-C
TM
connections are common in many newer devices such
as mobile telephones.
• Connect the cigarette lighter plug (1) to the cigarette lighter socket in your vehicle. The LED indicator
lamp (2) lights up and indicates, that the product is ready for operation.
• The connected USB device is now charging. Should you wish to operate the USB device, you may turn
it on now.
• Turn off the connected USB device before disconnecting it from the USB port or before disconnecting the
USB car charger from the cigarette lighter socket.
• Unplug the cigarette lighter plug from the cigarette lighter socket after use.
You may use the USB car charger with the engine running or off. However, avoid starting the
engine while the product is connected as this cuts power to the cigarette lighter socket briey (this
may not apply to all vehicle models). If the engine is switched off, drawing current over a longer
period of time will discharge the vehicle battery.
Cleaning and care
• Always disconnect the USB car charger from the cigarette lighter socket and all connected USB devices
from the USB ports before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical solutions
since these can penetrate the housing or impair functionality.
• Clean the product with a dry, bre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulll your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current .........................................10 – 30 V/DC 1.6 A
Output voltage .................................................. 5 V/DC
Total output power ............................................ max. 3 A (for both USB ports), 15 W
Output current per USB port .............................USB-C
TM
port: max. 3.0 A / USB-A port: max. 2.4 A
Operating conditions .........................................0 to +40 °C, 10% – 95 % RH
Storage conditions ............................................-10 to +55 °C, 5% – 95 % RH
Dimensions (L x Ø) ........................................... 56 x 28 mm
Weight ..............................................................20 g
Operating instructions
Car USB-charger CPS-3000/2C
Item no. 2290454
Intended use
The product is suitable for charging and operating USB devices in vehicles. Power supply is via a car
cigarette lighter socket. The product features a USB-A and a USB-C
TM
port. The USB ports are protected
against overload and short-circuit. It is only allowed to be used inside the car, not outdoors. Avoid contact
with moisture at all costs.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, re, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Car USB-charger
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or scan the printed
QR code. Follow the instructions on the website.
Description of symbols
The symbol with a ash in a triangle indicates health risks e.g. due to electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions contained in
these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on using the
device.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Always turn the connected appliance off before connecting or disconnecting it.
• Disconnect the USB car charger when not in use.
• The product gets hot during use. Ensure sufcient ventilation and never cover the product
during use.
• Do not short-circuit the USB outputs.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. Allow the device to reach room
temperature before connecting and using it. This may take several hours.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modications and repairs are to be performed exclusively by an expert or at
a qualied shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2290454_v2_1020_02_jc_m_en