Operating instructions

48
Troubleshooting
In purchasing the DMM, you have acquired a product which has been designed to the state of the art and
is operationally reliable. Nevertheless, problems or errors may occur. For this reason, the following is a
description of how you can eliminate possible malfunctions yourself.

Always follow the safety instructions!
Error Possible cause Remedy
The multimeter Is the battery dead? Check the status.
does not work. Replace batteries
No measured value Is a wrong measuring function Check the display (AC/DC)
change. activated (AC/DC)? and switch the function if applicable.
Did you use the wrong Compare the connection with the
measuring sockets? information from the operating
instructions.
Is the fuse defect? Check the fuses.
Is the “HOLD” function Press the “HOLD” button.
activated?

Repairs other than those described above may only be carried out by an authorised
specialist. If you have queries about handling the measuring device, our technical
support is available under the following telephone number:
Voltcraft®, 92242 Hirschau, Lindenweg 15, Tel.-No. 0180 / 586,582 7.