Data Sheet

ManualsBrandsVOLTCRAFT ManualsBattery ChargersCC-8 Charger for cylindrical cells Li-ion, LiFePO, NiMH, NiCd A, AA , AAA , AAAA, C, Sub C, 9V PP3, 10340, 145

VOLTCRAFT

- TOP PERFORMANCE IN EVERY WAY

“Since 1982, our product range has been dynamically adapting to the constant changes in the industry. We commit to offering first-class quality to

our customers while delivering an excellent cost-performance ratio. This philosophy remains the cornerstone of Voltcraft’s success.”

CC-8

ROUND CELL CHARGER

Nº 2176563

VERSION 12/21

The device is intended to be used as a battery charger and can be used with Ni-MH, Ni-Cd,and LiFePO4 rechargeable batteries. The charger is

compatible with a maximum cylindrical battery length of 74 mm. The charger has ten independent battery charging slots which include two for 9 V

block type batteries. The display shows information such as the voltage, current, capacity, and percentage charged for the selected slot.

FEATURES:

Bad battery detection // -dV control // Reverse polarity protection // Short circuit protection // Over charge protection // For type-C battery, max. 5

pcs. simultaneous charging

TECHNICAL DATA:

Input voltage / current 12 V/DC 3 A

Charging current

Default: 500 mA

Li-Ion / LiFePO4: 200 - 2000 mA

Ni-MH / Ni-Cd: 200 - 1000 mA

Output combination 1

Li-Ion 4.2 V, 4.35 V battery:

8 x (200 mA / 500 mA / 800 mA)

6 x 1000 mA

2 x 2000 mA (slots 1 and 8 only)

Output combination 2

LiFePo4 3.65 V battery:

8 x (200 mA / 500 mA / 800 mA)

6 x 1000 mA

2 x 2000 mA (slots 1 and 8 only)

Output combination 3

Ni-MH / CD 1.48 V battery:

8 x (200 mA / 500 mA / 800 mA / 1000 mA)

Output combination 4

Ni-MH / Li-Ion / LiFePo4 9 V block battery:

1 x 60 mA, 2 x 40 mA

Supported battery types

Li-Ion (3.2 V, 3.6 V, 3.7 V, 3.8 V) IMR, INR, ICR

LiFePo4: 10340, 14500, 16340 (RCR123A), 17500,

17650, 17670, 18490, 18500, 18650, 20700, 21700,

22650, 26500, 26650

Ni-MH/Cd (1.2 V): A, AA, AAA, AAAA, C, SC

9V block Ni-MH/CD, Li-ion and LiFePO4

Charging slots 10 (8 + 2) independent channels

Type-C battery max. 5 pcs (simultaneously)

LCD backlight 25 s automatic dimming

Protection

Short circuit, reverse polarity, over charge

Operating conditions 0 to +40 °C, ≤ 85 % RH (non-condensing)

Storage conditions 0 to +70 °C, ≤ 85 % RH (non-condensing)

Dimensions (L x W x H) 230 x 150 x 34 mm

Weight (charger only) 620 g (unit + power supply)

This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture

in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is

prohibited. This publication represent the technical status at the time of printing.

by Conrad Electronic SE.

2176563_V6_1221_01_PIX_ds

Push cable length 25 m

Dimensions (W x H x D) approx. 45 x 45 x 25.5 cm

Weight approx. 5.3 kg

Adaptor

Input 100 - 240 V/AC 50 - 60 Hz, max. 1.0 A

Output 12 V/DC 3 A

PACKAGE CONTENTS:

Charger // power adaptor // Operating instructions //

Summary of content (1 pages)

PAGE 1
VOLTCRAFT® - TOP PERFORMANCE IN EVERY WAY “Since 1982, our product range has been dynamically adapting to the constant changes in the industry. We commit to offering first-class quality to our customers while delivering an excellent cost-performance ratio. This philosophy remains the cornerstone of Voltcraft’s success.” CC-8 ROU N D CE LL CH A RGE R VERSION 12/21 Nº 2176563 The device is intended to be used as a battery charger and can be used with Ni-MH, Ni-Cd,and LiFePO4 rechargeable batteries.