USB INTERFACE ADAPTER FOR VOLTCRAFT 800 AND 900 SERIES DMM OPERATING INSTRUCTIONS Item no.
Introduction Dear Customer, In purchasing this Voltcraft® product, you have made a very good decision, for which we should like to thank you. You have acquired a high-quality product from a name brand that has distinguished itself in the field of measuring, charging and network technology by providing its customers with superior knowledge and expertise while striving toward continuous product innovation.
Installation Switch on your desktop computer, and allow the operating system to boot. Connect the supplied USB cable to any available USB port on your computer. The driver for the USB interface adapter is already installed on Windows®98 operating systems and later. The operating system will automatically detect the new device. Insert the adapter connecter into the wedge-shaped notch on the back side of the measuring instrument, and push it in until it snaps in place.
2 Shortcuts: allow you to select the connection type (RS232 (COM) or USB) directly. Press EXIT to quit the program. To start data transfer, press the appropriate button. 3 Area for viewing digital measured data. A bar graph is shown under the display. • As on the multimeter, the measured data is displayed together with all measurement functions and signs.
Legal Notice These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7 (www.voltcraft.de). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. These operating instructions represent the technical status at the time of printing.
