Security Datasheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 2533750
Material Safety Data Sheet
6. Accidental Release Measures
Steps to be taken in case material is released or spilled:
Batteries that are leakage should be handled with rubber gloves.
Avoid direct contact with electrolyte.
Wear protective clothing and a positive pressure Self-Contained Breathing Apparatus (SCBA).
7. Handling and Storage
Handling
Never swallow. Never charge. Never heat. Never expose to open flame. Never disassemble. Never reverse the positive and
negative terminals when mounting. Never short-circuit the battery. Never weld the terminal or wire to the body of the battery
directly. Never use different batteries together. Never touch the liquid leaked out of battery. Never bring fire close to battery
liquid. Never keep in touch with battery.
Storage
Never store the battery in hot and high humid place.
8. Exposure Controls/ Personal Protection
No engineering measure is necessary during normal use. If internal cell materials are leaked, the information in Section 4 &
Section 6 will be useful.
9. Physical/Chemical Characteristics
Nominal Voltage: 1.5V
10. Stability and Reactivity
Stability
Stable
Hazardous polymerization
Will not occur
Condition to avoid
See section 7.
Hazardous Decomposition or Byproducts
Hydrogen
11. Toxicological Information
NA
Page 3 of 4