Instructions

19
7. Operating elements
I
O
POWER
1
9
8
7
6
5
4
3
2
+
-
SENSE
-
+
OUTPUT
DC 13,8V
POWERON
OVERLOAD
1 Power switch to start the device (I = ON / O = OFF)
2 Green display indicating operating mode
3 Red display indicating an overload
4 Control with cover to set the DC output voltage
5 Inlet connector with earthing contact for cooling apparatus
6 Fan opening for cooling the device
7 Screw-type jack for high current output, “negative pole”
8 Screw-type jack for high current output, “positive pole”
9 “SENSE” connection for automatic correction of the voltage at the high current output