User manual

Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 96 04 / 40 87 80
(www.voltcraft.de).
Allrightsincludingtranslationreserved.Reproductionbyanymethod,e.g.photocopy,microlming,orthecaptureinelectronicdataprocessing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Voltcraft®
b) Connecting a USB device
1. Connect a USB device to the power adaptor’s USB port. The USB device must be turned
off at this time.
2. Connect the power cable to the power adaptor.
3. Connect the power plug to a common household power outlet. The power indicator lights
up to indicate the power adaptor is operational.
4. Now you can turn on your USB device.
5. Repeat these steps in the reverse order to disconnect your USB device from the power
adaptor.
6. Unplug the power adaptor when it is not in use.
TROUBLESHOOTING
Problem Possible cause Solution
The blue power LED does
not light up.
The power adaptor is not
supplied with voltage.
Check the power outlet's
circuit breaker.
Check whether the power
adaptor is correctly
connected to the power
outlet.
The power adaptor is
overloaded.
Disconnect all devices from
the power adaptor and
check all technical data.
CLEANING AND CARE
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Before cleaning, disconnect the product from the power supply and from all connected
devices.
• Never submerge the product in water.
• Maintenanceorrepairsmaybecarriedoutbyqualiedprofessionalsonly.Thereareno
components located inside the product you need to maintain. Never open/dismantle the
product.
• Tocleantheproduct,adry,softandcleanclothissufcient.Donotapplytoomuch
pressure to the housing to prevent scratching.
• Use a longhaired, soft and clean brush and a vacuum cleaner to easily remove dust.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Youthusfullyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.
TECHNICAL DATA
Operating voltage .......................... 100 – 240 V/AC, 50/60 Hz
Output voltage / current ................. 19 V/DC, 6.3 A ±10 % (DC output cable)*
....................................................... 19 V/DC, 5.7 A ±10 % (DC output cable)**
....................................................... 5 V/DC, 2.1 A (USB)
Output power ................................. max. 120 W* / max. 118 W**
Cable length .................................. 1.2 m (power cable) / 1.5 m (DC output cable)
Operating conditions ...................... 0 to +35 ºC, 10 – 85 % RH
Storage conditions ......................... -10 to +55 ºC, 5 – 95 % RH
Dimensions (W x H x D) ................ 122 x 19 x 75 mm
Weight ........................................... approx. 320 g (without power cable/accessories)
*if a notebook and no USB device is connected
**if a notebook and a USB device are connected
Plug Label
Plug Ø
inner / outer
Suitable for
E 1.4 / 6.5 mm Sony
G 1.0 / 5.0 mm Samsung
N 0.9 / 7.9 mm IBM
P 2.5 / 5.5 mm
Acer, Compaq,
Dell, HP, Fujitsu,
Gateway, Toshiba
Q 0.6 / 7.4 mm HP, Compaq
T 1.7 / 4.75 mm HP, Compaq
X 1.7 / 5.5 mm Acer
Z 0.6 / 7.4 mm Dell