Instructions
5
3. Intended Use
The charger "V-Charge 200 Duo" has two independent charge/discharge channels that each have a two-line lit display
and four operating buttons.
The charger is used to charge and discharge rechargeable batteries of the type NiMH/NiCd (1 - 15 cells), LiPo/LiIon/
LiFe/LiHV (1 - 6 cells) and lead batteries (1 - 10 cells, 2 V - 20 V).
The charging current for channel 1 can be set between 0.1 A and 10.0 A. The charging current for channel 2 can be
set between 0.1 A and 5.0 A (each depending on the cell number/rechargeable battery voltage). The maximum total
charging output is 200 W (each channel max. 100 W).
The discharging current for channel 1 and 2 can be set between 0.1 A and 5.0 A (depending on the cell number/
rechargeable battery voltage). The maximum discharge output for each channel is 15 W.
For each of the two charge/discharge channels, there is a connection for a temperature sensor available for battery
monitoring (not enclosed, can be ordered as an accessory).
For multi-cell lithium rechargeable batteries, each charge/discharge channel has a separate balancer. Matching bal-
ancer boards are included in the delivery.
The charger has an integrated mains unit to permit operation on mains voltage (230 V/AC, 50/60 Hz). The charger
may, however, also be alternatively operated on a stabilised direct voltage of 11 - 18 V/DC (e.g. via an external vehicle
lead battery or a suitable mains adapter).
The safety notes and all other information in these operating instructions always have to be observed!
Read the operating instructions carefully and attentively, and keep them for later reference. Only pass the product on
to any third parties together with the operating instructions.
Use other than that described above can lead to damage to the product and may involve additional risks such as, for
example, short circuits, re, electrical shock etc. The entire product must not be modied or converted, and the casing
must not be opened!
This product complies with the statutory national and European requirements.
4. Scope of Delivery
• Multifunctional charger
• 2x balancer board
• Connection cable for DC input
• 2x charging cable with T-plug
• Mains cable
• CD with operating instructions
Current operating instructions
Download the current operating instructions via the link www.conrad.com/downloads or scan the
QR code displayed. Observe the instructions on the website.