Manualshelf

Instructions

ManualsBrandsVOLTCRAFT ManualsBatteries & ChargersScale model multifunction charger 12 V, 230 V 10 A VOLTCRAFT V-Charge 200 Duo Lead-acid, NiMH, NiCd, LiPolymer, Li-ion,
31323334353637383940
40
• To set the output current and the output voltage, briey push the "START/ENTER" button.
Caution, important!
A connected consumer can be damaged when changing the output voltage.
Therefore, disconnect the connected consumer from the output sockets of the charger before changing the
output voltage.
The same applies, if applicable, when changing the output current.
The output current is now ashing in the display. Set it with the "INC" or "DEC" button (keep the respective button
pushed for quick adjustment).
• Briey push the "START/ENTER" button; the output voltage ashes. Set it with the button "INC" or "DEC" (for quick
adjustment, keep the respective button pushed).
• Briey push the "START/ENTER" button. The current power intake and the output voltage are displayed.
Briey push the "BATT TYPE./STOP" button to end this function. The output is deactivated again.
Push the "BATT TYPE./STOP" button again briey to return the charger to the main menu.