Instructions

b) Loading Battery Data

• Select the function "Memory Load" in the main menu of the charger with the

button "BATT TYPE./STOP" or "DEC".

• Conrm the selection by pressing the "START/ENTER" button.

• Select one of the 10 memories (0....9) with the button "INC" or "DEC".

The data stored in the memory are displayed, e.g. rechargeable battery

type, rechargeable battery programme, cell number, charging and discharg-

ing current.

• Load the battery data from the selected memory by pushing the button

"START/ENTER" for about 3 seconds.

• The charger is then in the corresponding rechargeable battery programme,

and the associated data are displayed.

In the example on the right, the data for a LiPo rechargeable battery with

3 cells, a capacity of 3000 mAh and a charge current of 3.0 A have been

transferred from the memory.

• The rechargeable battery programme can be started as usual by pushing the "START/ENTER" button for 3 sec-

onds.

Alternatively you can, of course, change the settings loaded from the memory, e.g. to increase or reduce

the charging current.

Briey push the "START/ENTER" button several times; the respective chosen set value ashes.

Change the set value using the button "INC" or "DEC". Keep the respective button pressed for quick adjust-

ment. Briey push the "START/ENTER" button to accept the setting.

When no display is ashing anymore, keep the "START/ENTER" button pushed (approx. 3 seconds), to

start the rechargeable battery programme.

PROGRAM SELECT

Memory Load

MEMORY LiPo [1]

BAL 3S 1.0A

LiPo BAL-CHG 3S

C= 3000mAh 3.0A