Instructions

3. Intended use
Thischargerisdesignedtochargesingle-cellLiPo/LiHV(1S)rechargeablebatteries.
There are four independent charging channels, which can be controlled via the backlit LC dis-
play and four buttons. You can switch between LiPo and LiHV charging modes.
The charger can charge batteries with different capacities and batteries from different manufac-
turersatthesametime.Thechargingcurrentand(maximum)chargingvoltagecanbesetfor
each individual channel.
Thechargerhasabuilt-inpoweradapter,whichispoweredbyamainsvoltage(100–240V/AC,
50/60 Hz). Alternatively, the charger can be powered by a 12 V/DC 2,5 A stabilized direct voltage
(e.g.viaasuitablepoweradapter).
For safety reasons, the product is protected against short circuits, current surges and overheat-
ing.
Always observe the safety instructions and all other information included in these operating
instructions!
Read the operating instructions carefully and keep them in a safe place for future reference.
Always provide these operating instructions when giving the product to a third party.
Using the product for any purposes other than those described above may damage the product
andresultinashortcircuit,reorelectricshock.
Always observe the safety information in these instructions.
4. Delivery content
• Charger
• Powercable(Europeanplug)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link
www.conrad.com/downloads or scan the QR code. Follow the instructions
on the website.
22