User manual

PSO2020
User’s Manual 27
Single: Acquire waveform when trigger occurred then stop
Slope: Set the slope to Rising (+) or Falling (-).
Rising: Trigger on rising edge
Falling: Trigger on falling edge
3.5 Measure Signal
3.5.1 Cursor
Click “Cursor” in main menu.
This method allows you to take measurements by moving the cursors
1. Source
The user can set the source to CH1.
2. Type
There are four types of cursors: Cross, Vertical and Horizontal.
1) Cross
The Cross cursors appear as cross lines on the display and measure the vertical and
horizontal parameters.
The Cross cursor display window: