Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory Test EquipmentPC scope module 20 MHz 1-channel 96 null 1 null 8 Bit Digital storage (DSO), Spectrum analyzer
21222324252627282930
PSO2020
User’s Manual 19
2.6 The Trigger System
Click “Trigger” in main menu.
Mode: Sets the trigger mode to Edge trigger
Sweep: Selects the trigger sweep mode to AUTO, NORMAL or SINGLE
Source: Selects the trigger source to CH1.
Slope: Selects the edge trigger slope to Positive or Negative slope
The user can drag the trigger icon to adjust the trigger level and the trigger level will be
displayed on the top right corner.
2.7 Input Connectors
Input Connectors:
CH 1: Input connectors for waveform display.
GND.: a ground terminal
USB PORT: Connect the A-Type Plug of USB cable to your pc.