User manual

PSO2020
User’s Manual 15
12. Output Window
13. The markers show the reference points of the displayed waveforms. If there is
no marker, the channel is not displayed.
14. Measure Window.
15. Trige state
16. "Running":the program found the hardware and the hardware works normally.
"Searching Device":not find the device and the program is searching the
device.
2.2 Button description
The buttons with PSO2020 pen storage oscilloscope as follows:
1、Voltage（V ）
“+”button
Single click：Voltage increase
Keep clicking：continuous increase with Voltage
“-” button
Single click：Voltage decrease
Keep clicking：continuous decrease with Voltage
R/S button
Single click：RUN or STOP
Keep clicking：AUTO SET
2、OFFSET (V↕)
“+” button
Single click：Waveform moves down
Keep clicking：Waveform continuous downward
movement
“-” button
Single click：Waveform move upward
Keep clicking ： Waveform continuous upward
movement
R/S button
Single click：RUN or STOP
Keep clicking：AUTO SET
3、POSITION (T↔)
“+” button
Single click：left shift
Keep clicking：left shift continuous
“-” button
Single click：right shift
Keep clicking：right shift continuous
R/S button
Single click：RUN or STOP