Instructions
61
destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free takeback of
waste. Conrad provides the following return options free of charge (more details on our website):
• in our Conrad ofces
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of. It should be
noted that different obligations about the return or recycling of WEEE may apply in countries outside
of Germany.
17. TECHNICAL DATA
PPS 11810 PPS 11360 PPS 11603
Operating voltage: 100 – 240 V/AC, 50/60 Hz
Max. input current (230 V/AC, 100 V/AC): 1.2 A / 2.4 A 1.2 A / 2.5 A 1.0 A / 2.0 A
Maximum output power: 180 W 180 W 150 W
Output voltage: 1 – 18 V/DC 1 – 36 V/DC 1 – 60 V/DC
Output current: 0 – 10 A 0 – 5 A 0 – 2500 mA
Residual ripple at nominal load: 5 mV, 30 mA
Voltage control response at 10 – 100 %
load change:
50 mV
Voltage control response at mains
uctuation (90 – 260 V/AC):
20 mV
Current control response at 10 – 90 % load
change:
100 mA
Current control response at mains
uctuation (90 – 260 V/AC):
50 mA
Display accuracy: ±0.2% +3 dgt
OVP switch-off level of the V output:
+2 V (1 – 5 V)
+3 V (5 – 18 V)
+2 V (1 – 5 V)
+3 V (5 – 20 V)
+4 V (20 – 36 V)
+2 V (1 – 5 V)
+3 V (5 – 20 V)
+4 V (20 – 60 V)
Degree of effectiveness: 84.7 % 85.9 % 86 %
Clock signal: 100 – 120 kHz
Performance factor with active PFC: >0.95
Device fan: Temperature controlled (0 – 100 %)
Mains fuse slow-blow (5 x 20 mm): F6AL250V
Operating temperature: 0 to +45 ºC
Operating humitiy: 10 – 80 %, non-condensing
Storage temperature: -15 to +70 ºC
Storage humidity: 0 – 85 %, non-condensing
Operating altitude: max. 2000 m above mean sea level
Safety class: 2
Weight: 2.4 kg
Dimensions (W x H x D): 200 x 90 x 208 mm