Instructions

54
C Clear Table Clear all the data in the data entry table for the external timed
programming function.
D Run / Stop Run (Run) / Stop (Stop) the external timed program according to
the values in the data entry table.
E Running Cycle The number of cycle that the timed program is going to run. The
value is valid from 0 – 999, where 0 means an innite cycle.
F Table Description A text eld for entering a table description.
G File management
Export table/settings as .csv le.
Import .csv formatted table/settings
Print current view
H Transfer settings Transfer set voltage and current to power supply.
I Ouput on/off Activate/deactivate power supply. Conrm input with button (H).
The LED display displays “O P OFF”.
J Current The eld where you can program the current to the power supply.
After inputting the value, press the enter button (H) to transfer the
settings to the power supply. Optionally, you may set the current
by the slider.
K Voltage The eld where you can program the voltage to the power supply.
After inputting the value, press the enter button (H) to transfer the
settings to the power supply. Optionally, you may set the voltage
by the slider.
L Output on/off Activate/deactivate power supply. Click on the control. While the
output is deactivated the LED display displays “O P OFF”.
M Settings You can read the voltage setting and current limitation of the
power supply.
N Status You can read the present voltage, current and power output of
the power supply. “C.V” is equivalent to the C.V. indicator; “C.C.”
is equivalent to the C.C. indicator.