Safety data sheet

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no. 101137
Material Safety Data Sheet
Page 3 of 7
7. Handling and Storage:
Handling
Any leakage or obnoxious odor of a cell, it should be disposed. Never solder a cell body. Do not contact cell terminals between
each other, or with another conductor. Neither throws into fire, decompose, heat, dent, deform, charge nor drop a battery. Do
not dip a cell in water or seawater.
Storage
Store cells without direct sunlight, high temperature, high humidity, rain, dew, etc., and select a storage location with a
temperature as low as possible (preferable temperature 20+/-15°C and relative humidity 70% or less). In addition, keep cells
away from dangerous matter such as combustible or ignitable materials. Absolutely never place a cell in contact with a
combustible or conductive substance. Prepare appropriate firefighting equipment.
Note
See handling and storing precautions described in the product catalog, specification, etc.
8. Prevention from Exposure:
Protection of respiratory organs
Not required in a normal operating state
Protection of eyes
Not required in a normal operating state
Other protective tools etc.
Not required in a normal operating state
9. Physical and Chemical Properties:
Shape:
Coin-shape. Contents are sealed in a stiff stainless steel vessel.
PH:
Not applicable because a cell is not soluble with water.
Boiling point/boiling range:
No information
Melting point:
No information
Decomposition temperature:
No information
Flash point:
No information