Datasheet

ManualsBrandsVOLTCRAFT ManualsTest & MeasurementHandheld multimeter digital MT-52 Environmental reading mode CAT III 600 V Display (counts): 4000

Illumination strength

Range Resolution Accuracy

4000 lux 1 lux ±(6% + 15)

40000 lux 10 lux ±(3.5% + 10)

Colour temperature accuracy of 2856 K; repetition accuracy ± 2%;

Temperature stability: ±0.1 % per °C; light sensor: Silicium photo diode with

spectral ﬁlter

Sound level

Range Resolution Accuracy

35 - 100 dB 0.1 dB ±5.5 dB

Accuracy at 94 dB and 1 kHz sinus; frequency range: 30 Hz – 10 kHz;

Assessment: Characteristic “C” (linear); time assessment: Fast; Microphone:

Condenser microphone

Diode test

Test voltage Approx. 1.5 V

Test current Approx. 1 mA

Resolution 0.001 V

Accuracy ±(10% + 5)

Overload protection: 600 V

Acoustic continuity tester

<100 Ω continuous sound, test voltage approx 0.5 V,

overload protection 600 V

NCV

Detection range: 200 - 1,000 V/AC

PACKAGE CONTENT

Multimeter // 1 set of measuring cables // Temperature sensor type K (sensors for light, noise and humidity are

integrated into the device) // 1 Battery (type 9 V Block) // Operating instructions

This data sheet is published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems

require the prior written approval by the editor. Reprinting, also in part, is prohibited. This data sheet represents the technical status at the time of printing.