User manual

26
5. Set the load selection switch (6) to set the test current. Please refer to the following table for correct setting.
Switch position Left Centre Right
Battery voltage 1.2V/ 1.5V 3V/ 12V 6V/ 9V
Test current 30mA 6 – 24mA 30 – 40mA
6. Insert the test battery as indicated in the following diagram.
For round cells or button cells For 9V battery
Quit the stand-by mode by either pressing and holding the “MODE/START” button (4) for 3 seconds or operating the “ON/OFF”
switch (9).