Datasheet

TECHNICAL DATA
Display LCD; 2000 counts
Measuring cable length about 80 cm each
Measuring impedance >7.5 MΩ (V range)
Automatic switch-off approx. 15 minutes
Operating voltage DMM 2 x micro batteries (AAA)
Signaller 9V block battery
Receiver 9V block battery
Working conditions 0 to 40°C (<75%rh)
Operating altitude max. 2,000 m
Storage temperature -10°C to +50°C (<80%rh)
Weight DMM ca. 308 g
Receiver ca. 125 g
Dimensions (LxWxH) DMM 162 x 74 x 44 (mm)
Over-voltage category CAT III 600 V, contamination degree 2
(only DMM via safety sockets)
Cable detector
Signal Permanent sound approx. 800 – 860 Hz;
wobble sound approx. 800 – 1050 Hz
Status indicator max. 50 V
Continuity tester <10 kΩ (optical)
Measuring cable length Banana clips approx. 50 cm each, modular plug ca. 25 cm
Overload protection <75 V/DC, <50 V/AC
V/DC
Range Resolution Accuracy
200 mV 0.1 mV ±(0.8 % + 4)
2 V 0.001 V
±(1.3 % + 4)
20 V 0.01 V
200 V 0.1 V
600 V 1 V
Overload protection: 600 V; impedance >7.5 MΩ
Alternating voltage V/AC
Range Resolution Accuracy
2 V 0.001 V
±(1.3 % + 6)
20 V 0.01 V
200 V 0.1 V
±(1.8 % + 10)
600 V 1 V
Frequency range 50 – 60 Hz; average value with sinus voltage; overload protection 600 V; impedance >7.5 MΩ
Resistance Ω
Range Resolution Accuracy
200 Ω 0.1 Ω ±(1.0 % + 6)
2 kΩ 0.001 kΩ
±(1.5 % + 4)20 kΩ 0.01 kΩ
200 kΩ 0.1 kΩ
2 MΩ 0.001 MΩ ±(2.0 % + 5)
20 MΩ 0,01 MΩ ±(5.0 % + 8)
Overload protection 600 V